Crib Arm for Mobile and Music Box Measurements

Fastening the clamp

The clamp will fit slats thick or thin; it can extend to max width of 1.5 inches.

The clamp may be affixed to either the sides or the ends of the crib. Use the rotating arm to ideally position the mobile.

 

Fastening the clamp

The clamp will fit slats thick or thin; it can extend to max width of 1.5 inches.

The clamp may be affixed to either the sides or the ends of the crib. Use the rotating arm to ideally position the mobile.

 

 

Width of clamp

The clamp is 3.5 inches which will fit any standard crib. (Crib slats and bars should be no more than 2 and 3/8" apart - about the width of a soda can). Please check the make of your crib.

To adjust the height, position the clamp higher or lower on the slats/bars.

The crib arm is designed to fit cribs with decorative outer edges; ensure the mast is on the inside of the crib.